Best picks

9 Best Portable Table Saws for the Money (November 2026)

Updated on · By the Sawdust Soup team

The best portable table saws for the money include the DeWalt DWE7491RS 10-Inch With Rolling Stand (best overall for most shops), the MarvTool 15Amp Portable Table Saw 10 inch for low-weight portability, and the SKIL TS6307-00 10-Inch Jobsite Saw for a folding stand.

On this page (10 sections)
  1. The best portable table saws for the money
  2. How these portable table saws were compared
  3. Which portable table saw has the widest rip capacity?
  4. Which portable table saw is easiest to carry?
  5. Do you need a portable table saw with a stand?
  6. Is a heavier portable table saw better for large stock?
  7. What makes a portable table saw useful for fine woodworking?
  8. Is the Evolution R10TBLX a good portable table saw for the money?
  9. Can a separate stand improve an existing table saw?
  10. How should you choose the best portable table saw for the money?

The best portable table saw for the money is the DeWalt DWE7491RS 10-Inch With Rolling Stand. Its 32-1/2 in rip capacity, 15 amp motor, rack and pinion fence and included rolling stand make it the strongest all-around choice for a shop that also works on jobsites.

Choose the MarvTool when low weight matters most. The SKIL TS6307-00 is the better fit when you want a folding stand and 4x4 cutting capacity, while the compact DeWalt DWE7485 is easier to store in a crowded workshop.

We compared the saws by rip capacity, blade size, cutting depth, fence adjustment, stand design, weight and the type of work each model supports. Scores reflect how well those features match the needs behind the search for the best portable table saw for the money.

Our picks at a glance

  1. 1 DeWalt DWE7491RS 10-Inch With Rolling Stand
    Best overall for most shops

    DeWalt DWE7491RS 10-Inch With Rolling Stand

    9.0/10 our score

    See it on Amazon
  2. 2 MarvTool 15Amp Portable Table Saw 10 inch
    Best for low-weight portability

    MarvTool 15Amp Portable Table Saw 10 inch

    8.8/10 our score

    See it on Amazon
  3. 3 SKIL TS6307-00 10-Inch Jobsite Saw
    Best for a folding stand

    SKIL TS6307-00 10-Inch Jobsite Saw

    8.7/10 our score

    See it on Amazon
  1. 4DeWalt DWE7485 8-1/4 Inch Compact SawCheck it
  2. 5SKIL SPT99-11 Worm Drive 10-Inch Saw

    SKIL SPT99-11 Worm Drive 10-Inch Saw

    Best for deep cuts and large stock
    Check it
  3. 6DeWalt DWE7485WS 8-1/4 Inch With Stand

    DeWalt DWE7485WS 8-1/4 Inch With Stand

    Best compact saw with a stand
    Check it
  4. 7Bosch GTS15-10 10-Inch With Rise StandCheck it
  5. 8Evolution R10TBLX 10-Inch With Wheeled StandCheck it
  6. 9VEVOR Portable Table Saw Stand

    VEVOR Portable Table Saw Stand

    Best for adding wheels to a saw
    Check it

The best portable table saws for the money

The DeWalt DWE7491RS is the best overall pick because it covers wide sheet goods, hardwood ripping, narrow cuts and mobile setup in one package. The other products earn their places by solving a specific problem, such as carrying weight, storage space, deep cuts or adding mobility to an existing saw.

1

DeWalt DWE7491RS 10-Inch With Rolling Stand: Best overall for most shops

DeWalt DWE7491RS 10-Inch With Rolling Stand, portable table saws for the money
9.0/10Our score
  • 32-1/2 in rip capacity
  • 15 amp motor
  • Rack and pinion telescoping fence
  • Rolling stand

The DWE7491RS combines the widest rip capacity here with a rolling stand, onboard storage and fast fence adjustments.

See it on Amazon

Pros

  • Largest rip capacity in this roundup
  • Rolling stand included
  • 2-1/2 in dust port

Cons

  • Heaviest saw in this roundup
  • Larger setup than compact models
2

MarvTool 15Amp Portable Table Saw 10 inch: Best for low-weight portability

MarvTool 15Amp Portable Table Saw 10 inch, portable table saws for the money
8.8/10Our score
  • 28.3 lb weight
  • 15 amp motor
  • 36-tooth blade
  • 0-45 degree cutting

The MarvTool is the lightest complete saw in this group, with a 10 in blade and adjustable height and angle controls.

See it on Amazon

Pros

  • Lightest saw here
  • 36-tooth blade included
  • 90 degree and 0-45 degree cuts

Cons

  • No included rolling stand
  • Rip capacity is not given
3

SKIL TS6307-00 10-Inch Jobsite Saw: Best for a folding stand

SKIL TS6307-00 10-Inch Jobsite Saw, portable table saws for the money
8.7/10Our score
  • Integrated folding stand
  • 25-1/2 in rip capacity
  • 4x4 cutting at 90 degrees
  • Rack and pinion fence rails

The SKIL TS6307-00 gives you a folding stand, useful 4x4 capacity and a 25-1/2 in rip range in a portable jobsite package.

See it on Amazon

Pros

  • Folding stand is integrated
  • 4x4 cutting capacity
  • Parallel blade alignment

Cons

  • Less rip capacity than the top DeWalt
  • Heavier than the MarvTool
4

DeWalt DWE7485 8-1/4 Inch Compact Saw: Best for compact storage

DeWalt DWE7485 8-1/4 Inch Compact Saw, portable table saws for the money
8.6/10Our score
  • 24.5 in rip capacity
  • 8-1/4 in blade
  • Rack and pinion fence
  • Metal roll cage base

This compact DeWalt keeps a 24.5 in rip capacity and rack and pinion fence while taking less room than 10 in jobsite saws.

See it on Amazon

Pros

  • Compact footprint
  • 24.5 in sheet-goods capacity
  • Power-loss reset

Cons

  • Smaller blade than 10 in saws
  • Stand is not included
5

SKIL SPT99-11 Worm Drive 10-Inch Saw: Best for deep cuts and large stock

SKIL SPT99-11 Worm Drive 10-Inch Saw, portable table saws for the money
8.5/10Our score
  • 3-5/8 in depth of cut
  • 30-1/2 in rip capacity
  • Worm drive gearing
  • Rolling stand with 16 in wheels

The SPT99-11 focuses on deep cutting, broad ripping and a rolling stand with large wheels for heavier material handling.

See it on Amazon

Pros

  • Deepest stated cut here
  • 30-1/2 in rip capacity
  • 16 in stand wheels

Cons

  • Heavy 94.3 lb body
  • Less compact than jobsite models
6

DeWalt DWE7485WS 8-1/4 Inch With Stand: Best compact saw with a stand

DeWalt DWE7485WS 8-1/4 Inch With Stand, portable table saws for the money
8.2/10Our score
  • 24.5 in rip capacity
  • Included jobsite stand
  • Rack and pinion fence rails
  • Power-loss reset

The DWE7485WS pairs DeWalt's compact 8-1/4 in saw with a jobsite stand, giving small shops a ready-to-set-up package.

See it on Amazon

Pros

  • Stand included
  • Compact blade platform
  • Blade brake

Cons

  • Smaller blade than 10 in models
  • Heavier than the saw-only DWE7485
7

Bosch GTS15-10 10-Inch With Rise Stand: Best for stand mobility

Bosch GTS15-10 10-Inch With Rise Stand, portable table saws for the money
8.1/10Our score
  • 32-1/8 in rip capacity
  • Gravity-Rise wheeled stand
  • Soft-start circuitry
  • Smart Guard System

The Bosch combines near-top rip capacity with a Gravity-Rise wheeled stand, soft start and a rack and pinion rip fence.

See it on Amazon

Pros

  • 32-1/8 in rip capacity
  • Single-action stand setup
  • Electronic speed regulation

Cons

  • 103 lb total saw weight
  • Lower stated speed than several rivals
8

Evolution R10TBLX 10-Inch With Wheeled Stand: Best for multi-material work

Evolution R10TBLX 10-Inch With Wheeled Stand, portable table saws for the money
8.0/10Our score
  • 26 in rip capacity
  • 0-45 degree bevel range
  • Dado plate included
  • Wheeled folding stand

The Evolution stands apart with a dado plate, zero-clearance throat plate, cross-cut sled and a stated ability to cut wood, mild steel, aluminum and composites.

See it on Amazon

Pros

  • Dado plate included
  • 26 in rip capacity
  • Electronic blade brake

Cons

  • Lower score for a standard wood-only shop
  • Heavier-duty setup than compact saws
9

VEVOR Portable Table Saw Stand: Best for adding wheels to a saw

VEVOR Portable Table Saw Stand, portable table saws for the money
7.9/10Our score
  • 350 lb load capacity
  • 8 in rubber wheels
  • Foldable steel frame
  • Adjustable mounting range

The VEVOR is a separate rolling stand for buyers who already have a compatible table saw and need folding support and wheels.

See it on Amazon

Pros

  • 350 lb load capacity
  • Foldable frame
  • Fits a range of saw sizes

Cons

  • Saw is not included
  • Compatibility depends on mounting dimensions

How these portable table saws were compared

The comparison starts with rip capacity, because a portable saw needs to handle more than short boards. A wider fence range gives you more room for shelving, trim, cabinet parts and sheet goods, while a compact saw can still work well when most cuts are narrow.

The DWE7491RS leads at 32-1/2 in, followed closely by the Bosch at 32-1/8 in and the SKIL SPT99-11 at 30-1/2 in. The SKIL TS6307-00 reaches 25-1/2 in, the Evolution reaches 26 in and both compact DeWalt models reach 24.5 in.

Blade size and cutting depth shape the kind of stock you can cut. The 10 in saws have a larger blade platform, while the 8-1/4 in DeWalt models trade some blade size for a smaller body.

The stated depth figures also differ. The MarvTool reaches 3.4 in at 90 degrees, the SKIL SPT99-11 reaches 3-5/8 in, the Evolution reaches 3-3/8 in and the DeWalt DWE7491RS reaches 3-1/8 in at 90 degrees.

Fence adjustment matters every time you change the cut width. Rack and pinion systems on the DeWalt, SKIL, Bosch and Evolution models help you make controlled adjustments instead of shifting a loose fence by hand.

Finally, we looked at mobility and setup. An included rolling or folding stand adds value for a jobsite, but it also adds weight and storage size.

The MarvTool is only 28.3 lb, while the DWE7491RS is 110 lb with its rolling setup.

The included equipment also affects daily value. Several saws include a blade guard, push stick, miter gauge and fence, while the DWE7491RS adds onboard storage and a 2-1/2 in dust port.

The Evolution adds a zero-clearance throat plate, cross-cut sled and dado plate, so its value is tied to specialty work rather than only basic ripping.

Which portable table saw has the widest rip capacity?

The DeWalt DWE7491RS has the widest stated rip capacity at 32-1/2 in, making it the best choice for wide shelving, trim and sheet-goods work. The Bosch GTS15-10 follows at 32-1/8 in, while the SKIL SPT99-11 reaches 30-1/2 in.

Best for wide panels: DeWalt DWE7491RS

The DWE7491RS gives you enough fence range for large shelving and trim materials without moving to a stationary cabinet saw. Its telescoping rails retract to create a smaller transport package, and its flip-over ripping fence handles narrow cuts.

The 15 amp motor is matched with a 10 in, 24-tooth carbide blade. A 2-1/2 in dust collection port connects to a vacuum, which helps contain debris during indoor setup.

The table measures 21-7/8 x 26-3/8 in, giving larger workpieces a useful support area. Its stated depth of cut is 3-1/8 in at 90 degrees and 2-1/4 in at 45 degrees, so it handles both straight and angled work within those limits.

Choose this model when wide cuts are a normal part of your work. Its 110 lb weight is the trade-off for the capacity, stand and material support.

Close alternative: Bosch GTS15-10

The Bosch gives you 32-1/8 in of rip capacity, only slightly behind the DeWalt. Its Gravity-Rise wheeled stand uses a single-action setup and includes 8 in treaded rubber-composite tires.

The Bosch also adds soft-start circuitry, electronic speed regulation and a Smart Guard System with a riving knife, anti-kickback pawls and a barrier guard. At 103 lb, it remains a substantial saw to move.

Its rack and pinion fence uses color-coded index pins and a hand dial, which gives you both larger and smaller adjustment control. The 3,800 rpm motor is electronically regulated to help maintain speed under load.

Pick the Bosch if its stand design and soft-start features matter more than the small difference in rip capacity. Pick the DeWalt for the wider cut range and stronger all-around score.

Which portable table saw is easiest to carry?

The MarvTool is the easiest complete saw to carry at 28.3 lb. It keeps a 10 in blade, 15 amp motor, adjustable blade height and 0-45 degree cutting range, but it does not include a rolling stand.

Best for carrying between rooms: MarvTool

The MarvTool makes sense for a workshop where the saw comes down from a shelf or moves between a garage and driveway. Its low weight is far below the 51.2 lb SKIL TS6307-00 and the 54 lb DeWalt DWE7485.

Its 36-tooth blade is suited to general cutting, and the product data gives a 3.4 in cutting depth at 90 degrees and 2.1 in at 45 degrees. The transparent blade guard and dust port support a cleaner, more visible setup.

The blade can be adjusted for straight cuts and bevel work from 0 to 45 degrees. Its 15 amp motor is listed at 4,600 rpm, giving it a useful compact format for DIY furniture and woodworking tasks.

The trade-off is the missing rip-capacity figure and the lack of an included stand. Choose it for lifting and storage convenience, not for a wide-panel workflow.

Best compact DeWalt: DWE7485

The DeWalt DWE7485 weighs 54 lb and uses an 8-1/4 in blade. Its 24.5 in rip capacity handles 4x8 plywood or OSB sheets, while the metal roll cage base supports regular jobsite transport.

Rack and pinion telescoping fence rails make width changes quick. Onboard storage keeps the fence, guard, wrenches and miter gauge with the saw.

The 15 amp motor is listed at 5,800 rpm, and the Site-Pro Modular Guarding System allows tool-free guarding adjustments. A power-loss reset also prevents an accidental restart after a power disruption when the switch is left on.

Pick the DWE7485 when you want compact storage with a defined rip range. If you want the same compact platform with a ready stand, move to the DWE7485WS.

Do you need a portable table saw with a stand?

You need an included stand when you set up on changing surfaces or move the saw often. A saw-only model works when you already have a stable bench or want to build a custom support system.

Best folding setup: SKIL TS6307-00

The SKIL TS6307-00 has integrated folding legs that become the stand, so there is no separate stand to store or attach. The 51.2 lb unit is heavier than the MarvTool but still practical for regular jobsite use.

Its 25-1/2 in rip capacity is enough for many sheet-goods cuts. A 4x4 cutting capacity at 90 degrees adds useful room for framing stock, and the dust port elbow redirects debris toward a collection container.

The rack and pinion fence rails keep adjustments smooth, while parallel blade alignment gives you a dedicated micro-adjustment for the blade and fence relationship. Its 10 in, 24-tooth carbide blade works with the 15 amp motor for general ripping.

The saw also includes an anti-kickback pawl, riving knife, blade guard, miter gauge and push stick. Choose this model when stand convenience and 4x4 work matter more than maximum rip width.

Best compact package with a stand: DeWalt DWE7485WS

The DWE7485WS adds a jobsite stand to the compact 8-1/4 in DeWalt platform. Its 24.5 in rip capacity remains suitable for 4x8 plywood and OSB, and rack and pinion fence rails keep the setup familiar.

The package includes a blade brake, power-loss reset and onboard storage for the guard, riving knife, anti-kickback pawls, miter gauge, push stick and wrenches. At 66 lb, it weighs more than the saw-only DWE7485.

Its listed speed is 4,300 rpm, and the included jobsite stand changes the practical setup even though the blade platform stays compact. This makes it easier to use where a bench is unavailable, but less convenient to carry than the saw-only version.

If you want a table saw with stand, choose this one when floor space is tight and a ready-made setup matters.

Is a heavier portable table saw better for large stock?

A heavier saw can give you a larger stand, deeper cutting capacity and more support for big material, but it also takes more effort to move. The SKIL SPT99-11 is the best heavy-duty choice here because it combines a 30-1/2 in rip capacity with a 3-5/8 in depth of cut.

Best for deep cuts: SKIL SPT99-11

The SPT99-11 uses worm drive gearing and reaches a stated 3-5/8 in depth of cut. That makes it the strongest match for thicker stock among these saws, while the 30-1/2 in rip capacity covers broad panels.

Its rugged rolling stand has 16 in wheels and easy-load handles. Outfeed and left support help one person manage larger cuts, and the rack and pinion fence system keeps width adjustments controlled.

The Dual-Field motor is described as running cooler so it can work harder for longer. The included Smart Guard System has an anti-kickback device, while the dust elbow directs debris toward one area for cleanup.

At 94.3 lb, this is not the pick for carrying up stairs every day. Choose it for a workshop or building site where deeper cuts and large material matter more than minimum weight.

Best for a rolling stand and broad cuts: DeWalt DWE7491RS

The DWE7491RS is lighter than the SKIL SPT99-11 but still substantial at 110 lb with its rolling stand. It gives you a larger 32-1/2 in rip capacity, a 3-1/8 in depth of cut at 90 degrees and a 2-1/4 in depth at 45 degrees.

Its stand is designed for setup and breakdown, while telescoping fence rails shorten the package for transport. Onboard storage keeps the guard assembly, fence, riving knife, miter gauge, wrenches and push stick together.

The saw also includes a 10 in, 24-tooth carbide blade and a 15 amp motor listed at 4,800 rpm. That combination suits repeated ripping of hardwood, framing lumber, shelving and trim when the extra rip width is more useful than the deepest possible cut.

For wide panels, choose the DeWalt. For the deepest cut, choose the SKIL SPT99-11.

What makes a portable table saw useful for fine woodworking?

A portable saw is more useful for fine woodworking when its fence adjusts in small controlled steps, the blade stays aligned with the fence and the setup supports clean repeatable cuts. The Bosch, DeWalt and Evolution models stand out for those needs in different ways.

Best for controlled fence adjustments: Bosch GTS15-10

The Bosch rack and pinion rip fence uses color-coded index pins and a hand dial for micro and macro adjustments. That design gives you a clear way to set a cut width without tapping the fence into place.

Its 10 in platform, 32-1/8 in rip capacity and electronically regulated speed suit repeated rip cuts through fine and hard wood. The Smart Guard System includes a three-position adjustable riving knife and anti-kickback pawls.

The open frame includes clamp zones that can serve as a light-duty secondary work surface. On-tool storage keeps the fence, miter gauge, Smart Guard System, wrenches and push stick with the saw.

For a deeper look at compact saw features, compare this approach with our guide to a portable table saw for fine woodworking. Pick the Bosch when fence control and stand mobility are central to your work.

Best for alignment features: DeWalt DWE7485

The DWE7485 gives you rack and pinion fence rails, Site-Pro Modular Guarding System adjustments and a compact metal roll cage base. Its 8-1/4 in blade platform keeps the body smaller than the 10 in choices.

The 24.5 in rip capacity handles common sheet-goods work, while onboard storage keeps the parts needed for setup together. A power-loss reset prevents an accidental restart after a power disruption when the switch remains on.

The included 24-tooth blade and 15 amp, 5,800 rpm motor give it a clear role for general wood cutting. The smaller platform means it is easier to store, but the stated capacity and blade size are below the 10 in saws.

Choose it for a compact fine-woodworking station with a bench or custom support. If you want a stand included, choose the DWE7485WS instead.

Is the Evolution R10TBLX a good portable table saw for the money?

The Evolution R10TBLX is the best pick here for woodworkers who want extra cutting options, not the best general choice for a standard wood-only shop. Its dado plate, zero-clearance throat plate, cross-cut sled and multi-material cutting focus separate it from the other saws.

Best for multi-material and dado work: Evolution R10TBLX

The R10TBLX has a 15 amp motor, 26 in rip capacity, 3-3/8 in maximum cut depth and a 0-45 degree bevel range. Its product data describes cutting wood, mild steel, aluminum and composites, so it suits a mixed-material workspace.

A zero-clearance throat plate and cross-cut sled support repeatable cuts. The included dado plate adds a capability that the other products in this roundup do not list, while the rack and pinion fence helps with width changes.

The collapsible wheeled stand, carry handles and outfeed support bar make the setup mobile. Its electronic blade brake, anti-kickback pawls and riving knife add listed safety features, while the 40-tooth tungsten carbide blade is included.

Choose it when those specialty features will get regular use. For ordinary lumber and panels, the DeWalt DWE7491RS offers a broader fit.

Read our Evolution R10TBLX review if dado compatibility and multi-material cutting are the reason you're considering it.

Can a separate stand improve an existing table saw?

A separate stand can improve mobility when your current saw has a compatible base and the combined weight stays within the stand's load limit. The VEVOR Portable Table Saw Stand is the relevant choice here because it is a support accessory rather than a complete saw.

Best add-on stand: VEVOR Portable Table Saw Stand

The VEVOR stand supports up to 350 lb and uses an adjustable installation range from 17.44 x 8.87 in to 22.64 x 19.1 in. Measure the mounting area of your saw against that range before choosing this option.

Its 8 in rubber wheels help move a mounted saw across a shop or jobsite. A release lever folds the steel frame for storage, and the stand itself weighs 16.5 lb.

The carbon-steel frame is powder coated, and the support legs plus rollers are designed for a mounted saw rather than a standalone cutting tool. The included package contains one table saw stand with wheels, so the saw and its accessories remain your responsibility.

This is a good route when you already own a table saw that lacks wheels or a folding base. It does not replace a table saw, so compare the total setup weight and footprint with buying a saw that includes its own stand.

How should you choose the best portable table saw for the money?

Choose the DeWalt DWE7491RS for the widest range of shop and jobsite work. Pick the MarvTool for the lightest carry, the SKIL TS6307-00 for an integrated folding stand, the compact DeWalt DWE7485 for storage, the SKIL SPT99-11 for deep cuts, the Bosch GTS15-10 for stand mobility and fence control, or the Evolution R10TBLX for dado and multi-material work.

A good decision starts with the largest cut you make, not the motor label alone. Measure your available storage, decide whether a stand is required and then compare rip capacity against the weight you are willing to move.

For most readers, the DeWalt DWE7491RS remains the best portable table saw for the money. Its 32-1/2 in rip capacity and rolling stand cover more common jobs than any other pick here, while the rack and pinion fence and onboard storage keep daily setup practical.

Our top 3 picks at a glance

  1. 1 DeWalt DWE7491RS 10-Inch With Rolling Stand
    Best overall for most shops

    DeWalt DWE7491RS 10-Inch With Rolling Stand

    9.0/10 our score

    See it on Amazon
  2. 2 MarvTool 15Amp Portable Table Saw 10 inch
    Best for low-weight portability

    MarvTool 15Amp Portable Table Saw 10 inch

    8.8/10 our score

    See it on Amazon
  3. 3 SKIL TS6307-00 10-Inch Jobsite Saw
    Best for a folding stand

    SKIL TS6307-00 10-Inch Jobsite Saw

    8.7/10 our score

    See it on Amazon

Frequently asked questions

Is a 10 inch portable table saw better than an 8-1/4 inch saw?

A 10 inch saw gives you a larger blade platform and more room for deeper cuts, while an 8-1/4 inch model is usually easier to store and carry. Pick the larger saw for thick stock and repeated ripping, or the compact model when transport and storage matter more.

Can a portable table saw cut hardwood?

Yes. The DeWalt DWE7491RS, SKIL TS6307-00, DeWalt DWE7485 and Bosch GTS15-10 all have 15 amp motors, and their product data describes hardwood or fine-wood cutting.

Use the correct blade and support the stock throughout the cut.

Can I add a stand to a table saw?

Yes, if the saw fits the stand's mounting range and the combined setup stays within the stand's load limit. The VEVOR stand supports up to 350 lb and has an adjustable installation range, so measure your saw before choosing it.