9 Best Cabinet Table Saws for the Money (November 2026)
The best cabinet table saws for the money include the DeWalt DWE7491RS 10-Inch With Rolling Stand (best overall for cabinet work), the SKIL TS6307-00 10-Inch Jobsite Saw for tight shop storage, and the DeWalt DWE7485 8-1/4 Inch Compact Saw for compact sheet-good ripping.
On this page (9 sections)
- The best cabinet table saws for the money
- Cabinet table saws compared side by side
- How we compared these saws
- Can a jobsite saw do real cabinet work?
- How much rip capacity do you need for cabinet parts?
- How do you set up a portable saw to cut like a cabinet saw?
- Which saw size and stand fit your shop?
- Which safety features matter on a cabinet-parts saw?
- Our pick for the best cabinet table saw for the money
Not one saw here is a true cabinet saw, which is a heavy enclosed machine bolted to a fixed base. These are the portable and benchtop saws that cabinet builders choose when the budget stops short of that.
So we judged each one on cabinet work: rip width for case sides, a fence that stays parallel, and a table that supports a full panel. The DeWalt DWE7491RS wins that test on rip capacity, stand and warranty.
Still setting a budget? Our table saw for the money guide splits the field into entry, mid and premium tiers.
Our picks at a glance
-
1
Best overall for cabinet workDeWalt DWE7491RS 10-Inch With Rolling Stand
9.0/10 our score
See it on Amazon -
2
-
3
Best for compact sheet-good rippingDeWalt DWE7485 8-1/4 Inch Compact Saw
8.6/10 our score
See it on Amazon
- 4
Check itSKIL SPT99-11 Worm Drive 10-Inch Saw
Best for heavy rolling use - 5
Check itRockler Table Saw Crosscut Sled with Telescoping
Best for repeatable crosscuts - 6
Check itBosch GTS15-10 10-Inch With Rise Stand
Best for quick blade stops - 7
Check itSKIL 8-1/4 Inch Compact Jobsite Saw
Best for a lightweight second saw - 8
Check itEvolution R10TS 10-Inch Jobsite Saw
Best for dado work and mixed materials - 9
Best for tiny model partsCheck it
The best cabinet table saws for the money
The DeWalt DWE7491RS is the best pick for most cabinet builders, and every other product below wins on one named need. They run from highest score to lowest.
DeWalt DWE7491RS 10-Inch With Rolling Stand: Best overall for cabinet work
- 15 amp, 4800 RPM motor
- 32-1/2 in rip capacity
- Rack and pinion telescoping fence
- 3 year limited warranty
The widest rip in this group, a rolling stand and onboard storage make it the saw to buy for cabinet parts.
Pros
- 32-1/2 in rip capacity
- Rolling stand included
- 3 year limited warranty
Cons
- 110 lb is the heaviest saw here
The DWE7491RS is the pick for most cabinet shops because it pairs a 15 amp, 4800 RPM motor with a 32-1/2-inch rip capacity and a rolling stand. That width handles wide shelving, vanity tops and trim stock that smaller saws can't.
The rack and pinion telescoping fence adjusts quickly, and a flip-over ripping fence handles narrow rips. The table measures 21-7/8 by 26-3/8 inches, with a 3-1/8-inch depth of cut at 90 degrees and 2-1/4 inches at 45.
Everything stays with the saw: the guard, fence, riving knife, miter gauge, wrenches, push stick and cord wrap all store onboard. A 2-1/2-inch dust port connects to a vacuum, and DeWalt adds a 3-year limited warranty.
The included 10-inch, 24-tooth carbide blade works for rough ripping, and a finer blade suits cabinet plywood. The trade-off is weight: at 110 pounds it's the heaviest saw here, so the SKIL TS6307-00 is the better pick if you carry your saw alone.
SKIL TS6307-00 10-Inch Jobsite Saw: Best for tight shop storage
- Integrated folding stand
- Micro-adjust blade alignment
- 25-1/2 in rip capacity
- 3 year limited warranty
A 10-inch blade on a 51.2 lb saw whose legs fold in, so it stores against a wall.
Pros
- Folding stand built in
- Blade parallel adjustment
- Anti-restart switch
Cons
- Rip tops out at 25-1/2 in
The SKIL TS6307-00 suits a small shop that wants a 10-inch blade without a 110-pound saw. It weighs 51.2 pounds, and its integrated legs fold in so the saw stores against a wall between jobs.
A 15 amp motor turns the 24-tooth carbide blade, and rack and pinion fence rails keep the fence parallel for smooth cuts. Micro-adjustment of the blade lets you set it parallel to the fence and miter slot, which helps cabinet joints close tight.
Rip capacity is 25-1/2 inches, so 24-inch cabinet sides fit but wide panels don't. It cuts 4x4 stock at 90 degrees, bevels from 2 to 47 degrees with stops at 0 and 45, and its anti-restart switch protects against a restart after a power outage.
The box holds a blade guard, riving knife, anti-kickback pawl, push stick, miter gauge, dust port elbow and two wrenches. The folded footprint is 28.74 by 27.17 by 16.93 inches.
Dado work needs an 8-inch dado set. SKIL adds a 3-year limited warranty, so pick this over the DeWalt when storage space matters more than rip width.
DeWalt DWE7485 8-1/4 Inch Compact Saw: Best for compact sheet-good ripping
- 24.5 in rip capacity
- Site-Pro modular guarding
- Metal roll cage base
- Power-loss reset
A 54 lb saw with telescoping rack and pinion rails that still rips 4x8 plywood.
Pros
- Telescoping fence rails
- Tool-free guard adjustment
- Roll cage base
Cons
- Smaller blade cuts shallower than 10-inch saws
The DWE7485 is the best pick for ripping sheet goods on a lighter saw. Its 8-1/4-inch blade and 15 amp, 5800 RPM motor sit in a 54-pound body, and the 24.5-inch rip capacity handles 4x8 plywood or OSB.
Rack and pinion telescoping fence rails make adjustments smooth and accurate. The Site-Pro modular guarding system adjusts without tools, and a non-thru cut riving knife and anti-kickback pawls come with it.
A metal roll cage base protects the saw in a truck or shop, and onboard storage holds the guard, fence, wrenches and miter gauge. A power-loss reset prevents accidental restarts after a power disruption.
The kit adds a 24-tooth blade, two blade change wrenches and a push stick, and the saw carries UL certification. It measures 22.75 by 22.75 by 13 inches, which fits on most benches.
The trade-off is blade size. An 8-1/4-inch blade can't cut as deep as the 10-inch blades on the DeWalt DWE7491RS or the Bosch, and the saw comes without a stand, so plan on a bench or a stand you already own.
SKIL SPT99-11 Worm Drive 10-Inch Saw: Best for heavy rolling use
- Worm drive gearing
- 3-5/8 in depth of cut
- 30-1/2 in rip capacity
- 16 in wheels on the stand
The deepest cut here, with outfeed and left support and big wheels for stairs.
Pros
- 3-5/8 in depth of cut
- Outfeed and left support
- 16 in wheels
Cons
- 1 year warranty versus 3 on the DeWalt
The SKIL SPT99-11 suits builders who move a saw across rough ground or up stairs. Its rolling stand has 16-inch wheels and easy-load handles, and the whole setup weighs 94.3 pounds.
SKIL's worm drive gearing gives a 3-5/8-inch depth of cut, the deepest in this group, with a 30-1/2-inch rip capacity. A rack and pinion fence makes adjustments quick and smooth, and SKIL's Dual-Field motor runs cooler so it can work harder, longer.
Outfeed and left support let one person handle larger cuts, and a dust port elbow gathers debris in one spot for cleanup. The Smart Guard System includes an anti-kickback device, and the saw has a brake.
It comes with a 24-tooth carbide blade, a miter gauge, an insert plate and a push stick. Its listed size is 39.76 by 30.2 by 20.08 inches, so measure your van or shop door before you order.
The trade-offs are warranty and rip width: SKIL covers it for 1 year against DeWalt's 3, and the DWE7491RS rips 2 inches wider.
Rockler Table Saw Crosscut Sled with Telescoping: Best for repeatable crosscuts
- 1/2 in phenolic base
- Fence extends 25 to 38-1/4 in
- Micro-adjust flip stop
- Bit-Saver hold-down clamp
Turns any saw with a standard miter slot into a precise crosscut station for cabinet parts.
Pros
- Flip stop repeats lengths
- Replaceable zero-clearance insert
- Cuts 90 to 45 degrees
Cons
- Crosscuts only, no ripping
The Rockler crosscut sled is the add-on that makes any saw cut cabinet parts more square. It handles 90-degree crosscuts and miters from 90 to 45 degrees, and an adjustable miter bar removes side-to-side play in the slot.
The base is 1/2-inch phenolic, which glides in standard miter slots without swelling or warping the way a plywood sled can. An extruded aluminum fence telescopes from 25 to 38-1/4 inches, and the micro-adjust flip stop repeats lengths for matching parts.
A Bit-Saver hold-down clamp secures the workpiece, and the replaceable zero-clearance insert supports fibers to reduce tearout. The extension work support, jig handle and a hardware pack come in the box.
The long fence matters for cabinet work, because a rail or stile that is 30 inches long still rests on the fence instead of hanging off the end. It is a newer product, first available in January 2026.
Pair it with any saw that has a standard miter slot. It's an accessory, not a saw, so it won't rip anything, and at 17.91 pounds it's one more item to store, but it beats a miter gauge for face frame stiles and drawer fronts.
Bosch GTS15-10 10-Inch With Rise Stand: Best for quick blade stops
- Brake stops blade in about three seconds
- Soft-start circuitry
- 32-1/8 in rip capacity
- Gravity-Rise wheeled stand
A brake, soft start and regulated speed on a wide-rip saw with a foot-release stand.
Pros
- Brake and soft start
- Color-coded fence scale
- Clampzone work surfaces
Cons
- 1 year limited warranty
The Bosch GTS15-10 suits a shop that values a quick brake and a smooth start. The brake helps stop the blade in about three seconds, and soft-start circuitry eases motor start-up so a breaker is less likely to trip.
Electronically regulated speed helps hold RPM under load from the 15 amp, 3,800 RPM motor. The rack and pinion fence uses color-coded index pins and a matching scale, and the rip capacity is 32-1/8 inches.
The Smart Guard System has a three-position riving knife, anti-kickback pawls and a barrier guard with a clear view of the cut. Clampzone areas let the tabletop act as a light-duty work surface, and the GTA50W Gravity-Rise stand sets up with a foot pedal and rolls on 8-inch treaded tires.
The listed blade has 50 teeth, a finer count than the 24-tooth blades on several saws here, which suits cabinet plywood. The saw body measures 28.1 by 27.8 by 13.53 inches, and the open frame roll bar keeps construction light.
It cuts 4x4 stock in a single pass. At 103 pounds with a 1-year limited warranty, it trails the DeWalt on coverage and the SPT99 on wheel size.
SKIL 8-1/4 Inch Compact Jobsite Saw: Best for a lightweight second saw
- 40 lb body
- Aluminum table
- 24.5 in rip to the right of the blade
- Dust port elbow
The lightest powered saw here, with an aluminum table and a safety switch.
Pros
- 40 lb weight
- Aluminum table
- Cuts dado joints
Cons
- Stand SFS0001 sold separately
The SKIL TS6308-00 is the lightest powered saw here at 40 pounds, which makes it a good second saw or a bench saw for a small shop. Its 15 amp, 1800 watt motor drives an 8-1/4-inch blade with 24.5 inches of rip to the right of the blade and 12 inches to the left.
Depth of cut is 2-1/2 inches at 0 degrees, enough for 3x material in one pass. An aluminum table, rack and pinion rails and parallel blade alignment keep cuts accurate, and the saw cuts dado joints.
The dust port elbow takes a 2-1/2-inch vacuum hose, with the vacuum sold separately. A safety switch gives immediate shutdown, and the modular guard system, miter gauge, push stick and anti-kickback pawls come with it.
The body measures 25.98 by 22.83 by 12.99 inches, so it stores on a shelf or under a bench. The micro adjustment of the blade lets you line it up with the fence and miter slot, which is a feature many saws at this size skip.
The trade-off is the stand: the SFS0001 folding stand is sold separately. It also cuts shallower than any 10-inch saw in this group.
Evolution R10TS 10-Inch Jobsite Saw: Best for dado work and mixed materials
- Zero-clearance throat plate
- Dado plate included
- 26 in rip, 3-3/8 in cut
- Electronic blade brake
A dado plate and zero-clearance plate come ready, and it cuts wood, mild steel and aluminum.
Pros
- Dado plate included
- Electronic blade brake
- 3 year warranty
Cons
- Rip trails the 30-inch-plus saws
The Evolution R10TS suits shops that cut dadoes and mixed materials. Its 15 amp motor with soft start drives a 10-inch, 40-tooth carbide-tipped blade through wood, mild steel, aluminum and composites.
A zero-clearance throat plate and a dado plate are included, so grooves for cabinet backs and shelves are ready to cut. It has a 26-inch rip, a 3-3/8-inch maximum cut and a 0 to 45 degree bevel range with geared adjustment.
Safety gear includes an electronic blade brake, anti-kickback pawls, a quick-release riving knife and a large paddle switch. A steel frame with carry handles, onboard storage and an outfeed support bar suit jobsite use, and a 3-year warranty applies.
It measures 29 by 29 by 15 inches, and the geared bevel adjustment makes it easier to dial in a 45-degree miter. The height-adjustable steel blade throat adds stability.
Choose it over the SKIL TS6307-00 for the dado plate and blade brake. Its 26-inch rip trails the three saws here that reach past 30 inches, so wide panels favor the DeWalt.
MXBAOHENG S3 Mini Table Saw: Best for tiny model parts
- 0 to 0.59 in cut depth
- 7-speed 12V to 24V adapter
- 4.2 lb body
- 0 to 90 degree cuts
A palm-size saw for balsa, thin wood and acrylic, not for cabinet panels.
Pros
- Fits in a palm
- Three blades included
- Speed control for fragile stock
Cons
- Not for hard wood or full-size parts
The MXBAOHENG S3 is a palm-size craft saw, not a cabinet tool. It measures 7 by 5.5 by 3 inches, weighs 4.2 pounds and cuts to a depth of 0 to 0.59 inches.
A 7-speed power adapter offers 12V to 24V settings, with lower voltages for fragile stock. It cuts balsa, basswood, craft board, acrylic and thin plastic, and it comes with HSS, alloy and PCB blades, a miter gauge and a dust tube.
The box also holds a resin grinding wheel cutting disc, a transparent board and three Allen wrenches. MXBAOHENG says to test cut first for a few seconds and to switch materials if the saw barely cuts.
A laser-engraved scale and aluminum slide bar set cuts from 0 to 90 degrees. MXBAOHENG says it isn't suitable for hard materials such as hard wood, and it asks for adult use with eye and hand protection.
Buy it for scale mock-ups and model parts next to a full-size saw. It can't stand in for any other saw here when you build cabinet carcasses.
Cabinet table saws compared side by side
The table shows the three numbers that matter most for cabinet work, so you can spot the rip width and motor you need at a glance.
| Product | Best for | Blade | Rip capacity | Motor | Our score |
|---|---|---|---|---|---|
| DeWalt DWE7491RS 10-Inch With Rolling Stand | overall for cabinet work | 10 in, 24-tooth carbide | 32-1/2 in | 15 amp, 4800 RPM | 9.0 |
| SKIL TS6307-00 10-Inch Jobsite Saw | tight shop storage | 10 in, 24-tooth carbide | 25-1/2 in | 15 amp | 8.7 |
| DeWalt DWE7485 8-1/4 Inch Compact Saw | compact sheet-good ripping | 8-1/4 in, 24-tooth | 24.5 in | 15 amp, 5800 RPM | 8.6 |
| SKIL SPT99-11 Worm Drive 10-Inch Saw | heavy rolling use | 10 in, 24-tooth carbide | 30-1/2 in | Worm drive, Dual-Field | 8.5 |
| Rockler Table Saw Crosscut Sled with Telescoping | repeatable crosscuts | Accessory, no blade | Crosscuts only (fence 25 to 38-1/4 in) | None | 8.4 |
| Bosch GTS15-10 10-Inch With Rise Stand | quick blade stops | 10 in, carbide | 32-1/8 in | 15 amp, 3800 RPM | 8.1 |
| SKIL 8-1/4 Inch Compact Jobsite Saw | a lightweight second saw | 8-1/4 in, carbide | 24.5 in right, 12 in left | 15 amp, 1800 watts | 7.7 |
| Evolution R10TS 10-Inch Jobsite Saw | dado work and mixed materials | 10 in, 40-tooth carbide-tipped | 26 in | 15 amp, soft start | 7.6 |
| MXBAOHENG S3 Mini Table Saw | tiny model parts | 2.48 in | Small stock, 0.59 in max depth | 7-speed 12V to 24V adapter | 6.6 |
How we compared these saws
We compared the specs and features of each product against what a cabinet builder needs, and we didn't test the saws ourselves. Our score weighs specs and features against what you're shopping for.
Four things set the order:
- Rip capacity and table size, because case sides and panels need support.
- Fence design, since a fence that stays parallel decides how well joints close.
- Stand and weight, which set where the saw can live.
- Guarding, brakes and the warranty each maker gives.
We also noted what each kit includes, such as a stand, a miter gauge or a dado plate, because a saw sold without a stand costs extra once you add one.
The Rockler sled is an accessory, so it's scored on how much it improves crosscuts on the saw you own. The MXBAOHENG scores lowest because it only cuts small, light stock.
Can a jobsite saw do real cabinet work?
Yes, for most home and small-shop cabinets, if you take time to set it up. A 15 amp saw with a good fence rips and crosscuts cabinet plywood and hardwood parts well.
What counts as the best cabinet table saw for the money
It's the saw with the widest rip, a fence that locks parallel and a table big enough to support a panel, without paying for a fixed cabinet base. On those points the three saws that rip past 30 inches lead this group.
Where these saws fall short of a true cabinet saw
A true cabinet saw is heavier and sits on a fixed base, so it runs steadier through long production days. The saws here trade that for portability, so slow your feed on thick hardwood and let the motor hold its speed.
DeWalt says its 15 amp motor rips hardwoods with ease, and Bosch's electronically regulated speed helps hold RPM under load. A folding or rolling stand also flexes more than a fixed base, which is why careful setup and a sled matter.
How much rip capacity do you need for cabinet parts?
You need at least 24 inches of rip and 30 inches is comfortable. Many base cabinet sides run about 23 to 24 inches deep, and a 24-inch fence setting halves a 4x8 sheet.
Saws with 24 to 26 inches of rip
The DWE7485 and SKIL TS6308-00 both rip 24.5 inches, the SKIL TS6307-00 rips 25-1/2 and the Evolution R10TS rips 26. That covers base cabinet sides and half sheets, but not wide panels in one pass.
Saws with 30 inches or more
The SKIL SPT99-11 rips 30-1/2 inches, the Bosch GTS15-10 rips 32-1/8 and the DeWalt DWE7491RS rips 32-1/2. Pick one of these if you build vanities, wide shelves or tops.
Rip capacity only helps if the table supports the panel. The SPT99 adds outfeed and left support, and the Evolution has an outfeed support bar, so a large panel stays flat as it leaves the blade.
Which side of the blade the number measures
Rip capacity is the distance from the blade to the far end of the fence rail on one side. The SKIL TS6308-00 lists 24.5 inches to the right of the blade and only 12 inches to the left, so a wide panel has to go on the right.
How do you set up a portable saw to cut like a cabinet saw?
Align the blade, check the fence, add a zero-clearance insert and use a sled for crosscuts. Those steps close most of the accuracy gap.
Align the blade to the miter slot
A blade that isn't parallel to the miter slot burns wood and pinches the cut. The SKIL TS6307-00 and TS6308-00 both offer micro-adjustment of the blade for parallel alignment, so set it with a dial indicator or a careful measurement.
Check the fence before you cut parts
Measure from the fence to the blade at the front and back of the table, and the two numbers should match. If a fence won't hold parallel, a table saw fence upgrade can be worth the money, though the rack and pinion fences on these saws are a good start.
Use zero-clearance and a sled
A zero-clearance insert supports wood fibers at the blade and cuts tearout. The Evolution R10TS includes a zero-clearance throat plate, and the Rockler sled comes with a replaceable zero-clearance insert and a 1/2-inch phenolic base for square crosscuts.
Feed stock with support
Keep stock tight to the fence and use a push stick for the last few inches. A table saw featherboard holds boards against the fence so your hands stay clear of the blade.
Plan for dust
Cutting cabinet plywood throws a lot of fine dust. The DeWalt DWE7491RS has a 2-1/2-inch dust port, the SKIL TS6308-00 supports 2-1/2-inch hoses, and the SKIL TS6307-00 and SPT99-11 include dust port elbows.
Keep the saw clean
Brush chips off the table, empty the dust path and store the wrenches and guard on the saw after each job. Every saw here has onboard storage or a place for them, which saves you hunting for a blade wrench next time.
Which saw size and stand fit your shop?
Pick a rolling 10-inch saw if you have floor space, a folding 10-inch saw for tight storage and an 8-1/4-inch saw if weight matters most. An 8-1/4-inch blade can't cut as deep as a 10-inch one, so thick hardwood favors the larger saws.
Rolling 10-inch saws
The DeWalt DWE7491RS, SKIL SPT99-11 and Bosch GTS15-10 all come with wheeled stands. The SPT99 has 16-inch wheels for stairs and rough ground, the Bosch has 8-inch treaded tires and a foot release pedal, and the DeWalt stand sets up and breaks down easily.
Folding and benchtop saws
The SKIL TS6307-00 folds its own legs for storage at 51.2 pounds. The DWE7485 at 54 pounds and the SKIL TS6308-00 at 40 pounds are 8-1/4-inch saws, and the TS6308-00 needs its SFS0001 stand bought separately.
Best cabinet table saw for the money in a garage shop
In a garage that also holds a car, the TS6307-00 gives you a 10-inch blade you can fold away. If you build furniture as well, our table saw for woodworking roundup covers more home shop setups.
Which safety features matter on a cabinet-parts saw?
A riving knife and anti-kickback pawls matter most, then a brake and restart protection. The Bosch, SKIL TS6307-00, DeWalt DWE7485 and Evolution each list both.
The Bosch brake helps stop the blade in about three seconds, the Evolution has an electronic blade brake, and the DeWalt DWE7491RS and SKIL SPT99-11 list a brake. The DWE7485 power-loss reset and the TS6307-00 anti-restart switch stop a saw from starting itself after an outage.
The Bosch and the Evolution both list soft start, which eases the motor into speed and lowers the chance of tripping a breaker on a shared circuit. That helps in a garage where the saw and a dust vacuum run together.
The TS6308-00 safety switch gives immediate shutdown. Wear eye and ear protection, and keep a push stick within reach.
Our pick for the best cabinet table saw for the money
Buy the DeWalt DWE7491RS if cabinet work is the goal: 32-1/2 inches of rip, a rolling stand and a 3-year warranty make it the best cabinet table saw for the money in this group.
Pick the SKIL TS6307-00 for tight storage, the SKIL SPT99-11 for the deepest cut at 3-5/8 inches and big wheels, and the Bosch GTS15-10 for soft start and a quick brake.
Choose the DWE7485 or SKIL TS6308-00 when weight matters, the Evolution R10TS for dado work, and add the Rockler sled to whichever saw you own for square crosscuts. Skip the MXBAOHENG S3 for cabinets, since it's built for model parts and thin stock.
Measure your shop door and storage spot against each saw's dimensions before you order, and check that an outlet sits within reach of the cord.
Our top 3 picks at a glance
-
1
Best overall for cabinet work
DeWalt DWE7491RS 10-Inch With Rolling Stand
9.0/10 our score
See it on Amazon -
2
-
3
Best for compact sheet-good ripping
DeWalt DWE7485 8-1/4 Inch Compact Saw
8.6/10 our score
See it on Amazon
Frequently asked questions
What blade is best for cutting cabinet plywood?
A blade with more teeth leaves cleaner edges on plywood than the 24-tooth blades that come on several saws here. Fit a finer blade for visible cabinet edges and keep the stock one for rough ripping.
Is a 15 amp saw enough for hardwood cabinet parts?
Yes, a 15 amp motor handles most cabinet hardwoods, and DeWalt says its 15 amp motor rips hardwoods with ease. Slow your feed on thick stock so the motor holds its speed.
Do I need a dado set for cabinet work?
You need one if you cut grooves for cabinet backs or shelf joints. The Evolution R10TS includes a dado plate, the SKIL TS6307-00 takes an 8-inch dado set with its insert, and the SKIL TS6308-00 cuts dado joints.
Which saw here is easiest to move?
The SKIL TS6308-00 is lightest at 40 pounds, followed by the SKIL TS6307-00 at 51.2 pounds with folding legs. For stairs and rough ground, the SKIL SPT99-11 rolls on 16-inch wheels.
Can the MXBAOHENG S3 mini saw cut cabinet parts?
No. It cuts to a depth of 0.59 inches and MXBAOHENG says it isn't suited to hard wood, so use it for balsa, thin wood and model work.
